Xtramus NuPOE-M16EL V1.1 - Manual (Page 18)

18
E-mail: [email protected]
Website: www.Xtramus.co
m
XTRAMUS
5 NuPOE-M16EL Management
You can configure the settings and check the running status of NuPOE-M16EL on the web browser.
5.1 Access to NuPOE-
16EL’s Management Webpage
Before accessing to NuPOE-M16EL
’s management webpage, please properly connect the PC with
NuPOE-M16El and rightly configure the IP address. Please refer to Connect to PC for Web Management
for details. The default IP address is 192.168.1.8.
5.1.1 Access with IP address
To access NuPOE-M16EL
’s management webpage, please open your web browser, and type in
NuPOE-M16EL ’s default IP address (192.168.1.8) in the web browser’s URL field.
Note:
If you’ve changed NuPOE-M16EL’s IP address, please use the IP address you’ve changed to.
5.1.2 Access with Network
You can access the NuPOE-M16EL ’s management webpage through the Network function provided
by windows (windows XP, windows7 or versions above). Click Network of the operation system, you can
see the NuPOE-M16EL is listed. Then click the icon of the NuPOE-M16EL device to enter the
management webpage.
If you can’t find the NuPOE-M16EL, you can reset the UPnP settings and then check whether the
NuPOE-M16EL device is listed again. This method is very convenient if you forget the IP address you’ve
set or under the condition of not connecting to the console.