Xtramus NuPOE-M16EL V1.1 - Manual (Page 29)

29
E-mail: [email protected]
Website: www.Xtramus.co
m
XTRAMUS
5.5 NuPOE-M16EL management Webpage
– Maintenance
Four options are available in the Maintenance configuration webpage: Upgrade, Save Changes, Set
Factory Defaults and System Reboot.
5.5.1 Upgrade
This function is used to upgrade the firmware/FPGA of the management module and the XL-T451
modules. There are three modes for this function, including Management Module, Single Daughter
Board, and Multi Daughter Boards.
Note : The Upgrade function doesn’t support cascading. You need to directly connect the PC with the
manage port of the specified chassis with a network cable. Only the modules inserted in this chassis can
be upgraded.
5.5.1.1 Management Card
This mode is to upgrade the firmware/FPGA of the management module.
Management Module
Browse…
Click the
Browse… button to choose the firmware file for upgrading.
NuPOE-M16EL ’s firmware files are in the format of “*.bin”.
Apply Click this button to start upgrading firmware/FPGA of XL-T451modules.