Xtramus NuPOE-M16EL V1.1 - Manual (Page 27)

27
E-mail: [email protected]
Website: www.Xtramus.co
m
XTRAMUS
5.4.2 Chassis Monitor
This page is used to check the fan speed and the temperature of each module.
Chassis Overview
A Chassis No.
B This picture shows the positions of the fans.
C
 The above fan icon displays the status of the fans. If problem
occurs in any of the fans, there will be a red cross on the fan
icon as a reminder to the users, shown as .
 The below thermometer icon displays the status of the
temperatures of the modules. If overheating occurs in any of
the modules, the liquid in the thermometer icon turns red as a
reminder to the users, shown as . You can set the
temperature threshold for the modules in Safety Settings
and the overheating occurs when any of the module
temperature exceeds the set temperature threshold. For
detailed information about how to set the temperature
threshold, refer to
Safety Settings .
D
This area displays the speed of each fan and the temperature of
each module with the unit of RPM and centigrade(℃),
respectively.