Zilog Z8F0411 User Manual
Page 8
MDS General-Purpose Board Development Kit
User Manual
UM016905-1207
Introduction
3
–
RS-485 screw terminal block: +12 V DC, D+, D–, GND (This
12 V DC supply can be used to power the MDS-GP and proces-
sor module).
–
External eight bit data I/O connector (J7). Pin-compatible with
CrystalFontz 320 x 240 graphic LCD.
–
Terminal blocks for easy connection to ADC channel inputs on
Z8 Encore! XP
®
and ZNEO
®
Z16F processors that support it.
–
Six high-drive outputs with terminal blocks. Jumper selectable
for 5 V DC or 12 V DC output.
–
Two relays with terminal block.
–
JTAG and Zilog
®
ZDI debug interfaces.
–
I
2
C 4 pin I/O connector.
•
On-board features and options:
–
512 KB fast SRAM
–
Footprints for user-installed Flash memory devices
–
I
2
C temperature sensor
–
Plug-in connector for optional trimble lassen SQ GPS module
–
Footprint for dinsmore 1490 digital compass
–
Plug-in connectors for optional maxstream 900 MHz or 2.4 GHz
wireless data module
–
Large prototyping area
–
4-layer printed circuit board
–
5.25 by 9.75 inch dimensions