AMETEK Lx Series II Programming Manual - Manual (Page 77)

Programming Manual Lx \ Ls Series II
73
4.17 Source Subsystem - Frequency
This subsystem programs the output frequency of the AC source.
Subsystem Syntax
[SOURce:]
FREQuency
[:CW | :IMMediate] <n> Sets the frequency
:MODE <mode> Sets frequency mode (FIX|STEP|PULS|LIST|SENS|EXT)
:SLEW
[:IMMediate] <n> | INFinity Sets the frequency slew rate
:MODE <mode> Sets frequency slew mode (FIX|STEP|PULS|LIST)
:TRIGgered <n> | INFinity Sets the triggered frequency slew rate
:TRIGgered <n> Sets the triggered frequency
FREQuency
This command sets the frequency of the output waveform.
Command Syntax [SOURce:]FREQuency[:CW|:IMMediate]<NRf+>
Parameters 45 to 5000
Unit HZ (Hertz)
*RST Value 60 Hz
Examples FREQ 50
Query Syntax [SOURce:]FREQuency?
Returned Parameters <NR3>
Related Commands FREQ:MODE FREQ:SLEW
FREQuency:MODE
This command determines how the output frequency is controlled. Available modes are:
FIXed The output frequency is unaffected by a triggered output transient. The
clock source is the internal controller timebase.
STEP The output frequency is programmed to the value set by
FREQuency:TRIGgered when a triggered transient occurs.
PULSe The output frequency is changed to the value set by
FREQuency:TRIGgered for a duration determined by the pulse
commands.
LIST The output frequency is controlled by the frequency list when a triggered
transient occurs.
SENSe External sync or line sync clock mode. The frequency is synchronized to
the external sync or line sync frequency. See Lx/Ls user manuals for
sync operation details.
EXTernal External clock mode. This mode is used on an Lx/Ls unit with the –LKS
option to sync to a master Lx/Ls unit.
Command Syntax [SOURce:]FREQuency:MODE<mode>
Parameters FIXed | STEP | PULSe | LIST | SENSe | EXTernal
*RST Value FIXed
Examples FREQ:MODE FIX
Query Syntax [SOURce:]FREQuency:MODE?
Returned Parameters <CRD>
Related Commands FREQ FREQ:TRIG