Aplex Technology APC-3284A - Manual (Page 16)

APC-3x84A /APC-3x85AUser Manual 16
2.3 Jumpers Setting and Connectors
1. JP5:
(2.0mm Pitch 1X2 box Pin Header),ATX Power and Auto Power on jumper setting.
JP5 Mode
Open ATX Power
Close Auto Power on (Default)
3. BAT1 :
(1.25mm Pitch 1X2 box Pin Header) 3.0V Li battery is embedded to provide power for
CMOS.
Pin# Signal Name
Pin1 VBAT
PIN2 Ground
4. DC_IN1:
(5.08mm Pitch 1x3 Pin Connector),DC9V~36V System power input connector。
Pin# Power Input
Pin1 DC+9V~32V
Pin2 Ground
Pin3 FG
6. VGA1:
(CRT 2.0mm Pitch 2X6 Pin Header), Video Graphic Array Port, Provide 2x6Pin cable to
VGA Port.
Signal Name Pin# Pin# Signal Name
CRT_RED 1 2 Ground
CRT_GREEN 3 4 Ground
CRT_BLUE 5 6 Ground
CRT_H_SYNC 7 8 CRT_DDCDATA