dbx Pro 260 - Manual (Page 14)

Getting Started
®
6
Section 1
DriveRack ™
System Setup
• The arrow will indicate the selected Wizard setup. To select any one of the three options,
rotate the <DATA> wheel. If you are performing the System setup, press either the <NEXT
PG> button or the <DATA> wheel and the display will appear as follows:
• Simply rotate the <DATA> wheel to select either a Mono or Stereo input configuration.
Once you have selected your input option, press the <NEXT PG> button and the display
will appear as follows:
• Simply rotate the <DATA> wheel to select either a Graphic or Parametric EQ. Once you
have selected your EQ option, press the <NEXT PG> button and the display will appear as
follows:
• Rotate the <Data> wheel to select any one of the numerous Insert modules available. Once
you have selected your Insert 1 module option, press the <NEXT PG> button and the dis-
play will appear as follows:
• Rotate the <Data> wheel to select any one of the numerous Insert modules available. Once
you have selected your Insert 1 module option, press the <NEXT PG> button and the dis-
play will appear as follows:
• Rotate the <Data> wheel to select any one of the numerous custom-tuned MAIN speaker
options available. If the speaker being used is not specified in the menu, select CUSTOM.
Once you have selected your Main speaker option, press the <NEXT PG> button and the
display will appear as follows:
Select Main PA
JBL SRX
>SR4702X Passive
Main Speaker
Select Insert 2
effect.
>AFS
Insert 2 Setup
Select Insert 1
effect.
>Compressor
Insert 1 Setup
Select EQ as GEQ
or PEQ
>PEQ
EQ Setup
Select Input as MONO
or STEREO.
>STEREO
Input Setup