Driverack, Xover, Peq geq or – dbx Pro 260 User Manual

Page 23: Geq/peq

Advertising
background image

®

STORE(Delete) - The store button is used to store program edits.When pressed
and held, the 260 will enter the PROGRAM DELETE module.

RTA (Wizard) - This enters the RTA mode, or when held, enters the 260
DriveRack Wizard setup menu which includes: System Setup, Auto EQ setup and
AFS Wizard.

Freq- 19.7kHz to Out
Slope - BS, BW, LR
(6,12,18,24,36,48)

Low Pass

High Pass

Repeat, for each crossover band

XOVER

To edit the parameters of the Crossover used in a selected program, simply use the following procedure. From program mode,

press the X-OVER button. Once you have reached the Crossover module, Navigate through the Pages of the selected Crossover

module by pressing the "Next Page" or "Prev Page" buttons successively until arriving at the desired Page.

Gain- -20 to 20dB

Successive presses of the Data wheel will select
effect parameters within the currently selected page.

XOVER

The XOVER button
toggles through
the XOVER used in
each channel of
the selected
program
menu.

Freq- 20.kHz to Out
Slope - BS, BW, LR
(6,12,18,24,36,48)

2.4 Navigating the XOVER Section

The EQ button
toggles through
the EQs used in
each channel of
the selected
program
menu.

PEQ

GEQ

or

To edit the parameters of the EQs used in a selected program, simply use the following procedure. From program mode,

press the EQ button to reach the EQ module to be edited. Successive presses of the EQ button will move through each channel.

Navigate through the Pages of the selected EQ section by depressing "Next Page" or "Prev Page" successively until arriving at the desired Page.

GEQ

On/Off

Flatten/Restore

EQ

EQ

Freq- 31.5Hz-18kHz

Gain -12dB to12dB

PEQ On/Off

Flatten/Restore

Bell,HSelf, LShelf, LHShelf,

B1 Freq- 20Hz-20kHz

Gain -12dB to12dB

Q .20 to 16.0

B2 Freq- 20Hz-20kHz

Gain -12dB to12dB

Q .20 to 16.0

B2 Freq- 20Hz-20kHz

Gain -12dB to12dB

Q .20 to 16.0

Successive presses of the Data wheel will select
effect parameters within the currently selected page.

GEQ/PEQ

...

2.3 Navigating the EQ Section (28-GEQ and PEQ)

Editing Functions

Section 2

DriveRack

15

DriveRack™ User Manual

Advertising