dbx Pro 260 - Manual (Page 52)

Utilities/Meters
®
44
Section 5
DriveRack ™
®
• Press the DATA wheel to select password to edit. When the level password
has been selected, press the store button to select a name. The display will
appear as follows:
• Once the password has been entered, press the STORE button to save.
Since the security system has three levels (high, med and low), there can be three different lev-
els of users accessing the unit. The high security password user can change/lockout all mod-
ules and users, while the medium security password user has access to limited modules and
functions and the user with low access will not have access to any modules with security set-
tings with a security clearance high or medium. The following information walks you through
the procedure for entering your password once a password has already been entered into the
unit.
• From Program mode, press the UTILITY button use the PREV PAGE and
NEXT PAGE buttons to move to the security page that appears as fol-
lows:
• If you wish to change the security level clearance at this point, press the
STORE button to enter the password and the screen will appear as fol-
lows:
<DATA> - SELECT CHARACTER
<PREV/NEXTPG> - LEFT/RIGHT:
<STORE>-SAVE/<UTIL>-EXIT
NAME:
Password
Enter Password
Press Store
<DATA> - SELECT CHARACTER
<PREV/NEXTPG> - LEFT/RIGHT:
<STORE>-SAVE/<UTIL>-EXIT
NAME: R OCK VENUE
Password
Edit High Password
Edit Med Password
Press Store to Change
DriveRack™ User Manual