Driverack, 1x1 filter select route, Mono dly 1.3 10 ms unused select link/unlink – dbx Pro 260 User Manual

Page 32: Comp select link/unlink

Advertising
background image

Configuring the DriveRack™

®

24

Section 3

DriveRack

B modules. Note that the same EQ types must be selected to link. Use the PREV
PG
and NEXT PG buttons to move through A and B, and then to the next module
screen which will appear something like this:

• You are now in the Pre-Crossover Insert module. The arrow (in correspondence with the

Module 1 or 2 indicators, along with the A and B indicators indicate which module block is
currently selected. Rotate the DATA wheel to select either Wire, AGC, Compressor, AFS,
Noise Gate or Subharmonic Synthesizer. Pressing and then rotating the DATA wheel lets you
link or unlink the A and B modules. Note that the same Effect types must selected to link.
Use the PREV PG and NEXT PG buttons to move through A and B, 1 and 2 and then to
the next module screen which will appear something like this:

• You are now in the Pre-Crossover Delay module. The arrow (in correspondence with the A

and B indicators indicate which module block is currently selected. Rotate the DATA wheel
to select Delay type and time. Pressing and then rotating the DATA wheel lets you link or
unlink the A and B modules. Note that the same Effect types must selected to link. Use the
PREV PG and NEXT PG buttons to move through A and B, and then to the next module
screen which will appear something like this:

• You are now in the Crossover module. The arrow (in correspondence with the with the A

and B indicators indicate which module block is currently selected. Rotate the DATA wheel
to select Crossover type. Pressing and then rotating the DATA wheel lets you select the route
path. You can route either Input A, Input B or the summed Input A+B to any mono input
crossover. A stereo crossover can only have A and B routed to its two inputs.Use the PREV
PG
and NEXT PG buttons to move through A and B, Outputs 1-6 and then to the next mod-
ule screen which will appear something like this:

1X1 FILTER

Select
Route

2

A

A

3

4

A

B

5

6

A

A

2

MONO DLY 1.3
10 ms Unused
Select
Link/Unlink

A

B

D

D

COMP

Select
Link/Unlink

A

B

2

N

C

C

F

1

DriveRack™ User Manual

Advertising