Configuring client devices – ARRIS 2247-N8-10NA User Manual User Manual
Page 56
Motorola 2247-N8 DSL Wi-Fi Gateway User Guide
Please visit
www.motorola.com/us/support
for FAQs and additional product documentation.
55
Configuring Client Devices
The Motorola 2247-N8 DSL Wi-Fi Gateway serves dynamically-assigned network addresses by default for wireless and Ethernet connected devices.
Be sure to configure each device connected to your 2247-N8 to accept a dynamically-assigned IP address, commonly referred to as Dynamic Host Con-
figuration Protocol, or DHCP. If your devices are not configured for DHCP operation, use the instructions in this section to set them to DHCP operation.
The procedure to configure DHCP operation is different for each set of computer operating systems. The instructions that follow provide procedures
for the most common home computer operating systems:
“Microsoft Windows 7 and Vista”