Connecting the gateway (continued), Connecting the gateway – ARRIS 2247-N8-10NA User Manual User Manual
Page 6
Motorola 2247-N8 DSL Wi-Fi Gateway User Guide
Please visit
www.motorola.com/us/support
for FAQs and additional product documentation.
5
Connecting the Gateway
1. Decide on a location for the 2247-N8.
Put the 2247-N8 near an AC wall outlet (the power source) and a
phone jack activated for DSL, in a cool location where none of the
2247-N8’s vents will be blocked.
Caution:
If the location is too hot or the vents are blocked, the high
temperature could cause the 2247-N8 to malfunction.
Location Guidelines
2. Connect the 2247-N8 to the DSL service:
Plug the telephone cable (included gray cord) into the gray DSL
port on the back of the 2247-N8.
Plug the other end of the telephone cable into a phone jack acti-
vated for DSL.
Note:
If your DSL service uses line filters, do not plug the telephone
cable from the 2247-N8 into a line filter.
Connecting to DSL Service
$3,
!#
.OTHIN
G
#LEAR
$3,
.O
$3,