Urear panel connections, Figure 6 - rear jacks, Input jack – ART Pro Audio ProChannel II User Manual
Page 13: Preamp out jack, Comp in jack, Comp out jack, Rear panel connections
12
REAR PANEL CONNECTIONS
FIGURE 6 - Rear Jacks
INPUT Jack
This XLR jack provides balanced inputs to the microphone preamplifier. The input impedance of the XLR
connection is variable by the front panel Impedance knob.
The Front panel 1/4" Instrument input overrides the rear jack when it is used.
PREAMP OUT Jack
This 1/4” T/S unbalanced jack provides a direct signal from the microphone preamplifier, ahead of the EQ
and dynamics processors. This output can be used in conjunction with the INSERT INPUT jack to insert
external signal processors between the main preamp section and the compressor of the Pro Channel II™.
COMP IN Jack
This 1/4” T/S unbalanced jack is an input to the EQ and dynamics processing sections. This input can be
used in conjunction with the MIC PREAMP OUTPUT jack to insert external signal processors between the
main preamp section and the EQ and dynamics processing of the Pro Channel II™.
COMP OUT Jack
This 1/4” T/S unbalanced jack provides a direct signal from the microphone preamplifier, ahead of the EQ
and dynamics processors. This output can be used in conjunction with the INSERT INPUT jack to insert
external signal processors between the main preamp section and the EQ and dynamics processing of the Pro
Channel II™.