Artesyn ATCA-F120 Installation and Use (August 2014) - Manual (Page 85)

Functional Description
ATCA-F120 Installation and Use (6806800D06J) 85
4.10.2 Available IPMI Drivers
An IPMI driver is included in the Linux distribution available for the blade.
4.10.3 Watchdog
The IPMC contains two watchdogs.
One watchdog is implemented in the IPMC hardware and supervises the operation of the IPMC
itself. This watchdog is not configurable and is permanently enabled.
F120 CPLD Code Artesyn-specific Discrete
Digital Always
F120 CPLD Vers. Artesyn Firmware Revision While payload powered
F120 FPGA Vers. Artesyn Firmware Revision Always
F120 HotSwap PICMG 3.0: FRU HotSwap Always
F120 IPMB0 State PICMG 3.0: IPMB Physical
Link Always
F120 IPMC Artesyn IPMC Status Always
F120 Watchdog Watchdog 2 Always
FIX1 Temp Temperature Always
FIX2 Temp Temperature Always
HotSwap AMC B1 PICMG 3.0: FRU HotSwap Always
HotSwap AMC B4 PICMG 3.0: FRU HotSwap Always
HotSwap F120 RTM PICMG 3.0: FRU HotSwap Always
OS Boot OS Boot While payload powered
Payload Power Current Always
SYS FW PROGRESS System Firmware Progress While payload powered
Top Edge Temp Temperature Always
Table 4-7 IPMI Sensors Overview (continued)
Sensor Name Sensor Type Availability