Audioscan Verifit - Manual (Page 39)

Verifit ® User's Guide Version 3.12  May 2015
Format
Except for Viewport, Distortion, Input/Output, Battery drain and Manual control screens, you have the option of
selecting either a graphic or tabular format.
To change the data format, highlight, then <PICK> [Graph] or [Table].
Scale
On the Multicurve test screen, you have the option of displaying test results in SPL (dB) or gain (dB).
To change the scale, highlight, then <PICK> [dB SPL] or [dB Gain]
Hide or Show test box curves
To hide or show test curve(s):
1. Highlight, then <PICK> Curve [Hide/Show].
2. Highlight, then <PICK> the desired test to toggle between the Hide or Show options. The curve will toggle
on or off when selected. The envelope of speech curves in Speechmap may be displayed or hidden for clarity
of display by toggling the buttons under the -
column. Note that you may set the envelope to
automatically hide whenever a new test is run 1.(see Speechmap – Speechmap Setup).
3. Press <Continue> to return to the test screen.
Hiding a curve does not erase it. To erase curves use the <Session> key.
1996 or 2003 ANSI standard
Automated tests of linear and AGC hearing aids may be conducted according to either the ANSI S-3.22-1996 or
ANSI S3.22-2003 test standards. For differences, see ANSI S3.22-1996 facts and ANSI S3.22-2003 facts
To select the standard to be used:
1. Press <Setup, then highlight and <PICK> [ANSI]
2. Highlight and <PICK> the version of the ANSI standard you wish to use.
39