Avery Dennison SNAP 611 - Manual (Page 20)

12 • 2. Loading Supplies Users Manual - 610 / 611 / 612 Printers
12. Close the cover.
13. Press Feed / Cut to position the supply under the printhead.
You may need to adjust the wide / narrow knobs depending on the width of your supply. See
"Adjusting the Wide / Narrow Knobs” for more information.
If the printer will be unused for extended periods of time, leave the printhead unlatched.
Loading Labels – 612
Make sure the printer is configured for the correct supply type.
To load a roll of labels:
1. Open the cover.
2. Unlock the printhead by turning the retaining latch.