Avery Dennison SNAP 611 - Manual (Page 66)

58 • 7. Care and Maintenance Users Manual – 610 / 611/ 612 Printers
9. Snap the printhead into place.
10. Make sure the printhead cable does not touch the ribbon roll.
11. Clean the new printhead with a cotton swab dipped in isopropyl alcohol to remove any salt
or oil left from handling.
12. Let the printhead dry and reload your supplies.
13. Close the printhead assembly and the cover.
14. Turn on the printer.
15. Press Feed / Cut to position the supply under the printhead.
Do not touch here