Avery Dennison SNAP 611 - Manual (Page 26)

18 • 2. Loading Supplies Users Manual - 610 / 611 / 612 Printers
4. Push the deflector tab down.
5. Slide the extra ribbon core on the take-up reel as far as it will go with the writing on the
end of the core facing out. Use your empty ribbon core as the take-up core. The take-up
core only fits on the take-up reel one way.
6. Remove the new ribbon from the package as shown. Do not wrinkle or crush the new
ribbon.
CAUTION
Since some supplies are more abrasive to printheads than others, using a
ribbon wider than your supply helps protect the printhead. Failure to do
this may void your printhead warranty.