Avery Dennison SNAP 611 - Manual (Page 21)

Users Manual - 610 / 611 / 612 Printers 2. Loading Supplies • 13
3. Lift printhead assembly using the printhead tab until the assembly locks into place.
CAUTION
Make sure you use only approved Paxar supplies. See Appendix A,
"Specifications and Accessories" for a list of Paxar supplies or contact
your Paxar Representative for more information.
4. Place the roll of supply on the supply holder. Make sure the supply unrolls from the top as
shown.
Do not pick up the printer
by the supply holder.
5. Adjust the supply holder guides so the sides barely touch the roll. Make sure the supply
roll turns freely.
Supply Guides