Avery Dennison 6030 Operator Handbook - Manual (Page 67)

Chapter 10. Using Diagnostics
n
Only a System Administrator or Service person should use
Diagnostics.
You can use diagnostics to
✦ check the version string.
✦ check memory allocation.
✦ check machine totals.
✦ perform hardware tests.
✦ reset your application.
✦ perform service diagnostics.
To access these options, you need to use the DIAGNOSTIC
MENU in the Command mode. To get to the DIAGNOSTIC
MENU:
1. From the MAIN MENU, press > until you see:
Configuration
Diagnostics
2. Press e . You will see:
DIAGNOSTIC MENU
Version Strings
10-1