Avery Dennison 6030 Operator Handbook - Manual (Page 70)

To display Machine Totals:
1. From the DIAGNOSTIC MENU, press > until you see:
Memory Info.
Machine Totals
2. Press e . You will see:
Print Total
###
3. Press e or b .
Performing Hardware Tests ––––––––––––––––––––––––––––––––––
The HARDWARE TEST menu has the following selections:
Printing Tests Prints a Test Pattern, performs a Speed
Test, checks the Gray Scale of a printed
label, and adjusts the print contrast.
Serial Port Test Checks the Serial Port.
Sensors Tests Tests the On-Demand and Black Mark
sensors.
Printhead Tests Checks the Dot Resistance and
Temperature of the printhead.
Battery Test Checks the Battery recharging capacity.
Scanner Test Checks the functionality of the Scanner.
Display Tests Checks the functionality of the Backlight
and performs a Pixel Test.
Keypad Test Checks the functionality of each key on
the Keypad.
Motor Checks the functionality of the motor.
6030 Operator’s Handbook
10-4