Baby Lock Momentum Quilting Frame (BLQM) Instruction and Reference Guide User Manual
Page 20
18"
24"
Take-up Leader
Backing Leader
3/4" Casing
Center Marks
3/4" Casing
18"
Top Leader
3/4" Casing
Fig-S. 2-1
Leader Cloth Diagram
Leader Cloth Example
Fig-S. 2-2
Pins
Take Up Leader
Top Leader
Backing Leader
Quilt Top
Batting
Quilt Backing
Casing
Insert Fabri-Fast Tube
Down the Length of
Casing
Casing
Casing
Page. 19
Section 2-1: High thread count fab-
ric such as Muslin is recommended for
Leader Cloth material. Thick fabric may
be difficult to install in the rail Fabri-Fast
Slot.
Section 2-2: Cut your Leader Cloth
fabric to the match that of the Leader
Cloth Diagram with room for 1 inch for
a fabric casing and the width 6 inches
shorter than your rail length. Surge or
hem all edges.
Section 2-3: Fold over 1 inch for the fabric casing and sew a 3/4 inch casing with a conventional
sewing machine leaving both ends open.
Section 2-4: Slide the Fabri-Fast Tubing down the casing to ease the use of the Fabri-Fast system.
(Section 1)
Section 2-5: Pin the Leader Cloths to the appropriate sections of the quilt. (Fig-S. 2-2)
Section 2: Leader Cloth