Basler Electric IDP-1200 - Manual (Page 16)

8 9437200990 Rev C
Page Description
71 Bridge 11 Temperature Trending Graph
72 Bridge 11 Temperature Trending Data
73 Bridge 12 Temperature Trending Graph
74 Bridge 12 Temperature Trending Data
75 Bridge 13 Temperature Trending Graph
76 Bridge 13 Temperature Trending Data
77 Bridge 14 Temperature Trending Graph
78 Bridge 14 Temperature Trending Data
79 Bridge 15 Temperature Trending Graph
80 Bridge 15 Temperature Trending Data
81 Horizontal Capability Curve
82 Vertical Capability Curve
83 System Configuration
84 Cleaning Lock
85 Screen Saver
86 Get Page
87 System Configuration 2
Alarms Banner
Most screens display an alarms banner that lists the six most recent system alarms. Each alarm is
labeled with a description and the date and time of the alarm. The timestamp for acknowledgement and
clearing (if applicable) of alarms is also displayed. Active alarms are displayed as white text on a red
background. Acknowledged alarms are displayed as yellow text on a black background. Cleared alarms
are displayed as red text on a white background.
System Configuration Screen
This screen (Figure 3) has provisions for adjusting the screen saver time delay, adjusting the display
brightness, and selecting the display language.
An indicator turns red to indicate the connection of a USB device to the IDP-1200. A button below the
indicator can be pressed to de-energize the IDP-1200 USB port for safe removal of a USB device from
the IDP-1200.
If the IDP-1200 panel requires cleaning, the Lock for Cleaning button can be pressed to enable cleaning
of the screen without inadvertently pressing buttons.
A Log In button accesses an alphanumeric keypad where the appropriate password can be entered to log
in and make IDP-1200 settings changes. The IDP-1200 is delivered with a level 1 password of “1234” and
a level 2 password of “4321”. The proper, level 1 password is required to select the IDP-1200 display
language. The proper level 2 password is required to configure the IDP-1200 as a local or remote display
or to change passwords. Instructions for changing the password are provided in Password Settings.
IDP-1200 Operation with ECS2100 and ECS/RW IDP-1200