BayTech RPS Single-phase Combined - Manual (Page 12)

RPS with or without Ethernet
12
Type ‘voltage’ at the prompt to display the unit’s True RMS Voltage, and the RPS will display the
following:
Type ‘power’ at the prompt to show the unit’s Average Power and the RPS will display the following:
Type ‘temp’ at the prompt to show the unit’s current temperature, the RPS will display the following:
NOTE: RPS units with external sensor ports will be displayed as Ext 1 and/or Ext 2.
Logging Out
Type Logout, Logoff, or Exit at the prompt to logoff from the unit.
Current User Password:
Type ‘password’ at the prompt to change the current user’s password and the RPS will display the
following:
Internal Temperature: 87.8 F Ext. 2: 70.0 F
Unit ID: BT RPS26ADEN-16
-------------------------------------------------------------------------------
| Phase | True RMS | Peak RMS | True RMS | Average | Volt- |
| Group | Current | Current | Voltage | Power | Amps |
-------------------------------------------------------------------------------
| Phase A1 | 0.2 Amps | 0.2 Amps | 209.7 Volts | 0 Watts | 54 VA |
| Phase A2 | 0.3 Amps | 0.3 Amps | 209.6 Volts | 0 Watts | 67 VA |
| Phase B1 | 0.2 Amps | 0.2 Amps | 1.3 Volts | 0 Watts | 4 VA |
| Phase B2 | 0.2 Amps | 0.2 Amps | 1.3 Volts | 0 Watts | 4 VA |
-------------------------------------------------------------------------------
----------------------------------------
| Phase | Average | Volt- |
| Group | Power | Amps |
----------------------------------------
| Phase A1 | 0 Watts | 52 VA |
| Phase A2 | 0 Watts | 67 VA |
| Phase B1 | 0 Watts | 4 VA |
| Phase B2 | 0 Watts | 4 VA |
----------------------------------------
--------------------------------
| Phase | True RMS |
| Group | Voltage |
--------------------------------
| Phase A1 | 209.6 Volts |
| Phase A2 | 209.5 Volts |
| Phase B1 | 1.3 Volts |
| Phase B2 | 1.4 Volts |
--------------------------------
Enter new Password:
Re-Enter new Password: