Becker TRAFFIC ASSIST Z101 - Manual (Page 48)

48
>>> NAVIGATIONAL MODE
> D
> GB
> F
> I
> E
> NL
The Automatic on/off key
The Traffic Assist can switch
automatically to sleep mode when the
vehicle ignition is switched off.
Prerequisite:
• The Traffic Assist must be connected to
the vehicle cigarette lighter (see also
page 16).
• The cigarette lighter is de-energized
after the ignition is switched off.
• The relevant function can be switched
on at the Traffic Assist.
> Press Automatic on/off .
Depending on the previous setting, the
function will be switched on or off. The
current setting is indicated via display of
the relevant icon in colour.
• Left icon: The function is switched on,
the Traffic Assist does switch off auto-
matically.
• Right icon: The function is switched
off, the Traffic Assist does not switch off
automatically.
The Calibration key
If the touch-screen reacts incorrectly
to the touching of the screen in specific ar-
eas, calibration is required.
The calibration can be started using the
following button.
> Push the button Calibration .
The calibration process is started.
You will be guided through the procedure
by means of text instructions.
The Factory settings key
You can reset your Traffic Assist to the
factory settings.
All the changed settings will be reset and
saved destinations will be deleted.
> Press the Factory settings button.
> Press the Yes button.
The Traffic Assist is reset to the factory
settings.