BECKHOFF BK7500 - Manual (Page 24)

SERCOS interface Coupler BK7500
24 BK7500
IDN Name Type Attributes Default
value Function
S-2-0001 Channel type Variable Read/Write I/O data channel + 0001
Meaning The channel type describes the type of the terminal. This also depends on
the IDN P-0-0001 (see Table xxx).
KL1xxx (strict) 0x0001 16 bit data (without KL1501)
KL1xxx (compact) 0x0001 32 bit data (without KL1501)
KL2xxx (strict) 0x0001 16 bit data (without
KL2502)
KL2xxx (compact) 0x0001 32 bit data (without
KL2502)
KL1501 (strict/ compact) 0x8006 16 bit data
KL2502 (strict) 0x8003 16 bit data
KL3xxx (strict) 0x8002 16 bit data
KL3xxx (compact) 0x8002 32 bit data
KL4xxx (strict) 0x0003 16 bit data
KL4xxx / KL2502 (compact) 0x8003 16 bit data
KL5xxx (strict / compact) 0x8007 16 bit data
KL6xxx (standard) 0x8004 16 bit data
KL6xxx (alternative) 0x8004 16 bit data
IDN Name Type Attrib
utes Default
value Function
S-2-0002 Channel IDN list IDN I/O data channel + 0002
Meaning This list contains the identification numbers supported by the relevant
channel.
IDN Name Type Attrib
utes Default
value Function
S-2-0003 Occupied inputs Uint 16 Read I/O data channel + 0003
Meaning This operating data contains a bit mask specifying the occupied inputs for
this channel. Every bit that is set represents a usable input.
IDN Name Type Attrib
utes Default
value Function
S-0-0011 I/O state class 1 Uint 16 Read
Meaning Affects bits 11-13 in the I/O station's status word.
IDN Name Type Attrib
utes Default
value Function
S-0-0030 Manufacturer version Variable, 1 byte Read 0xXXXX
Meaning Shows the manufacturer version in the operating data.