Beisler 2211-5 - Manual (Page 14)

Short Seam Automat 2211-5 Working Instructions
- B 14 -
Beisler Automated Sewing Equipment
B.2
Functions of the machine
B.2.1 Sewing functions of the machine
The short seam automat 2211-5 can perform six different,
automated sewing functions:
•
Clipping and crimping over of the left slash selvage with
subsequent sewing of the slash selvage to the left trou-
sers component.
• Sewing the slash selvage to the right trousers compo-
nent.
• Clipping and crimping over of the side pocket to the
left trousers component.
• Clipping and crimping over of the side pocket to the
right trousers component.
• Clipping and crimping over of the left slash selvage and
the sewing of the left slash selvage to the left trousers
component at ladies' trousers.
• Sewing of the right slash selvage to the right trousers
component at ladies' trousers.
B.2.2 Machine cycle left slash selvage
The machine cycle "Clipping left slash selvage and sewing
it to the left trousers component" is performed as follows:
•
The left slash selvage is lined up manually at the pick-
up plate.
• The slash selvage is clipped, crimped over by the folder
and picked up.
• The left trousers component is positioned manually on
the working plate.
The folder transports the slash selvage to the left trou-
sers component and puts it down.
• The trousers component with the slash selvage is au-
tomatically transported by the transport system to the
sewing head where it is tucked.
• The finished sewing piece is then blown off the workta-
ble with compressed air.
• The assistance transport is activated.