Beisler 2211-5 - Manual (Page 35)

- B 35 -
Short Seam Automat 2211-5 Working Instructions Beisler Automated Sewing Equipment
Controlling machine cycle in Mode 07:
1. Depress footswitch for machine operation:
• The folder moves right to the pick-up plate.
• The cutter "Right trousers component" opens,
2. Depress footswitch for machine operation and keep
depressed:
• Vacuum is activated.
• Line up and smooth out right trousers component.
3. Release footswitch:
• The cutter "Right trousers component" cuts, the
slash selvage stop swivels to the trousers compo-
nent.
• Line up right slash selvage to right trousers com-
ponent at stop.
4. Depress footswitch for machine operation:
• The folder moves left.
• The main clamp moves to the insertion station and
picks up the sewing pieces.
5. Depress footswitch for machine operation:
• Further machine cycle is fully automatic:
The main clamp transports the sewing pieces to
the sewing head.
The sewing pieces are tucked and blown off from
the working plate with compressed air.
The main clamp returns to its start position.
The next machine cycle starts.
NOTE - Supplying sewing pieces!
If the fully automatic machine cycle was started, the next
sewing pieces can be lined up.
The footswitch for machine operation remains deactiva-
ted until the main clamp reaches its start position; after that,
the next machine cycle can be started.
B.3
Operation
B.3.12 Start mode 06 / 07
Start mode for:
•
"Right slash selvage"
• "Left slash selvage for ladies' trousers"
The machine cycle "Sew right slash selvage to right trou-
sers component" can be performed in two different mo-
des (Mode 06, Mode 07).
Controlling machine cycle in Mode 06:
1. Depress footswitch for machine operation:
• The folder moves right to the pick-up plate.
• The cutter "Right trousers component" opens,
2. Depress footswitch for machine operation and keep
depressed:
• Vacuum is activated.
• Line up and smooth out right trousers component.
3. Release footswitch:
• The cutter "Right trousers component" cuts, the
slash selvage stop swivels to the trousers compo-
nent.
• Line up right slash selvage to right trousers com-
ponent at stop.
4. Depress footswitch for machine operation:
• Further machine cycle is fully automatic:
The folder moves left.
The main clamp transports the sewing pieces to
the sewing head.
The sewing pieces are tucked and blown off from
the working plate with compressed air.
The main clamp returns to its start position.
The next machine cycle starts.
NOTE - Supplying sewing pieces!
If the fully automatic machine cycle was started, the next
sewing pieces can be lined up.
The footswitch for machine operation remains deactiva-
ted until the main clamp reaches its start position; after that,
the next machine cycle can be started.