Belshaw Adamatic Type B Donut Cutter - Manual (Page 25)

Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
Type B Donut Cutter TS MN-1528EN 9
FRENCH CRULLER PLUNGER – FORMER WILL NOT ROTATE
Possible Causes What To Do
Gibs inside piston on 7B-1003 or 7B-1006
side rod assembly are worn out or sheared
off. Replace 7B-1003 or 7B-1006 side rod
assembly.
FRENCH CRULLER PLUNGER – DOUGH WILL NOT DROP OFF
CLEANLY
Possible Causes What To Do
5a. Batter too stiff.
5b. Cylinder tip not clean.
5c. Cylinder tip damaged.
5a. Thin mix down with warm water or
warm milk.
5b. Wash tip and oil lightly.
5c. Replace cylinder.
FRENCH CRULLER PLUNGER – FRENCH CRULLERS WILL NOT
HOLD SHAPE
Possible Causes What To Do
6a. Improper temperature or improper
mixing.
6b. Improper fry time and temperature.
6a. Check proper temperature and mixing
time.
6b. Check for proper fry time and
temperature.
FRENCH CRULLER PLUNGER – DONUTS COME OUT MISSING
FLUTES
Possible Causes What To Do
7a. Former 7B-1002 flutes plugged.
7b. Trip arm bent.
7a. Disassembly plunger, clean former and
reassemble.
7b. Adjust trip arm spacing. See SB-17 in
Appendix.