Beurer BM 58 - Manual (Page 28)

28
The technical alarm is a non-locking alarm and must not be
reset. The signal shown on the display will disappear auto-
matically after about 8 seconds.
10. Cleaning and storing the instrument
• Clean your device and cuff carefully only with a slightly
moistened cloth.
• Do not use detergents or solvents.
• On no account must you immerse the computer in water,
otherwise liquid can enter it and cause demage.
• When storing the device, make sure that no heavy objects
are placed on top of it. Remove the batteries. The cuff
tube should not have any sharp kinks.
11. Specifications
Model no. BM 58
Measurement
method
Oscillometric, non-invasive blood pres-
sure measurement on the upper arm
Measurement
range
Cuff pressure 0 – 300 mmHg,
systolic 60 – 260 mmHg,
diastolic 40 –199 mmHg,
Pulse 40 –180 beats/minute
Display accuracy Systolic ± 3 mmHg, diastolic ± 3 mmHg,
pulse ± 5 % of the value shown
Measurement
inaccuracy
Max. permissible standard deviation
according to clinical testing:
systolic 8 mmHg /diastolic 8 mmHg
Memory 2 x 60 memory spaces
Dimensions L 100 mm x W 150 mm x H 58 mm
Weight Approx. 364 g (without batteries)
Cuff size 22 to 30 cm
Permissible oper-
ating conditions
+5 °C to +40 °C, ≤ 90 % relative air
humidity (non-condensing)
Permissible
storage conditions
-20 °C to +55 °C, ≤ 95 % relative air
humidity, 800 –1050 hPa ambient pres-
sure
Power supply 4 x 1,5 V AA batteries
Battery life For approx. 500 measurements,
depending on the blood pressure level
and/or pump pressure
Accessories Cuff, instructions for use, 4 x 1.5 V AAA
batteries, USB cable, storage pouch
Classification Internal supply, IPX0, no AP or APG,
continuous operation, type BF applied
part
Technical information is subject to change without notifica-
tion to allow for updates.