Beurer MC 5000 User Manual

Page 21

Advertising
background image

21

Kneading and tapping

>

Press the kneading

and tapping

massage buttons.

The kneading and tapping massages can be activated together.

Shiatsu

>

Press the massage button

.

The massage programme starts.
Total duration: 15 minutes. Afterwards, the massage chair switches to standby mode.
Roller

>

Press the massage button

.

The massage programme starts.
Total duration: 15 minutes. Afterwards, the massage chair switches to standby mode.

Automatic air pressure massage for the seat, calf and foot area.

>

Press the auto air button

.

The air pressure massage programme starts.
Total duration: 15 minutes. Afterwards, the massage chair switches to standby mode.

Concentrated massages

Partial massage

While the current massage programme is running:

>

Press the partial button

.

The partial massage begins with the current position of the massage rollers as the centre point.

An area of 8 cm around this centre point is massaged intensively.

>

Press the partial button

again.

The massage programme continues.

Spot massage

While the current massage programme is running:

>

Press the spot button

.

The spot massage begins with the current position of the massage rollers as the centre point.

The area directly around this centre point is massaged intensively.

>

Press the spot button

again.

The massage programme continues.

Settings

Strength – strength of the kneading and tapping massage

The settings low, medium, high and off are available.

>

Press the strength button

in the kneading and tapping automatic massage programmes.

Each time the button is pressed, the next setting is selected.

Width – distance between massage rollers

The settings narrow, medium and wide are available.

>

Press the width button

in the tapping and rolling massage.

Each time the button is pressed, the next setting is selected.

Raise roller position

>

Press the up button in the partial and spot massage.

The massage rollers are raised.

Lower roller position

>

Press the down button in the partial and spot massage.

The massage rollers are lowered.

Advertising
This manual is related to the following products: