Beurer MC 5000 - Manual (Page 24)

24
Step 3:
> Connect the lower end of the back cushion and the lower end of
the seat cushion using the zip fastening.
> Lay the seat cushion with the back cushion on the massage chair
over the back rest.
> Connect the back cushion and the back rest using the
zip fastening.
Step 4:
> Fold the seat cushion backwards against the back rest.
> Connect the air hoses behind the seat with the air hoses on the
seat cushion.
Plug the hose marked red into the connection marked red.
Plug the hose marked white into the connection marked white.
> Replace the seat cushion on the seat.
Important! Do not pinch the hoses. Ensure that the hoses are not
crossed and or kinked.
Step 5:
> Plug the mains plug into a socket.
> Switch on the main switch at the bottom of the rear side.
> Switch on the massage chair at the on/off button on the hand
switch.
The massage chair is now ready for operation.