Beurer MC 5000 - Manual (Page 25)

25
• Wear comfortable clothes during the massage.
• Remove all objects from your trouser pockets (e.g.
keys, pocket knife, mobile phone).
• Assume a comfortable, relaxed position.
• Always sit in the middle of the seat so that your
spine is positioned precisely between the massage
rollers.
• The massage should feel pleasant and relaxing
at all times. If the massage is painful or
uncomfortable, stop the massage or change your
sitting position.
• If the device has not been used for a longer period
of time, check that the device is functioning
correctly before use.
Before switching on
> Press the on/off button on the hand switch.
After it is switched on, the massage chair goes into
a semi-flat position. You can now select a massage
programme.
• After selecting one of the automatic massage
programmes (relax, refresh or therapy), your entire
back is scanned to determine the size of the user.
• After selection one of the massage programmes
(kneading, tapping, rolling or Shiatsu), the air
pressure massage can be activated separately.
• Press the intensity button to set the strength
of the air pressure massage or to switch it off.
• The air pressure massage can be switched on or
off separately for the seat, legs and feet.
w Massage programme buttons
Starting the massage
Warning!
• Before using the device for the first time, read the
safety notes in the Safety section.
w
Safety, pages 15 to 16
Danger of tipping!
• Sit down carefully on the chair and only when it is
in the upright position. Never sit down on the chair
when it is in the flat position.
Caution!
• If you experience irritations of any kind, stop
treatment immediately.
Important!
• Never remove the pillow or back cushion during the
massage.
6. Operation
Flat position/upright position
> Put the massage chair in the flat position
It is possible to set a horizontal flat position.
The back rest and the leg rest can be raised or lowered
individually.
The functions are available when a massage programme is
on or off.
w Position buttons for upright and flat position