Blu Bathworks BT8001 - Manual (Page 7)

6
1 866 907 0122 blubathworks.com
2015-02
Alcove Installation using Tile Flange
BT8001 · BT8005 · BT8007
In order to maintain the symmetry of these narrow rim tub models in an alcove installation, the following points
& illustration are provided below.
1. Determine wall finish material and its thickness
2. Install tile flange on corner edge of bathtub using high density silicone above and below
lip of TF.BTSB tile flange as shown in Detail I (exploded)
3. Install bathtub
4. Install wall finish
5. Apply a clear silicone bead where the tub and wall finish meet at the flange location
**Blu Bathworks recommends TF.BTSB Tile Flange (Sold separately)
DETAIL I
DETAIL I (exploded)
Silicone
above & below lip