Bronkhorst E-8000 - Manual (Page 3)

Warranty
Bronkhorst products are warranted against defects in material and workmanship for a period of three years from the date of
shipment provided they are used in accordance with the ordering specifications and not subjected to abuse or physical damage.
Products that do not operate properly during this period may be repaired or replaced at no charge. Repairs are normally warranted
for one year or the balance of the original warranty, whichever is the longer.
i
www
See also paragraph 9 of the Conditions of sales:
http://www.bronkhorst.com/files/corporate_headquarters/sales_conditions/en_general_terms_of_sales.pdf
The warranty includes all initial and latent defects, random failures, and undeterminable internal causes.
It excludes failures and damage caused by the customer, such as contamination, improper electrical hook-up, physical shock etc.
Re-conditioning of products primarily returned for warranty service that is partly or wholly judged non-warranty may be
charged for.
Bronkhorst High-Tech B.V. or affiliated company prepays outgoing freight charges when any part of the service is performed under
warranty, unless otherwise agreed upon beforehand, however, if the product has been returned collect to our factory or service
center, these costs are added to the repair invoice. Import and/or export charges, foreign shipping methods/carriers are paid by
the customer.
Safety Precautions
The following safety precautions should be observed before using this product and any associated instrumentation.
This product is intended for use by qualified personnel who recognize shock hazards and are familiar with the safety precautions
required to avoid possible injury. Read the operating information carefully before using the product.
Before operating, make sure the line cord is connected to a properly grounded power receptacle. Inspect the connecting cables,
test leads, cracks, or breaks before each use.
The module and accessories must be used in accordance with its specifications and operating instructions or the safety of the
equipment may be impaired.
If required, replace fuses with the same type and rating for continued protection against fire hazard.
Opening of the equipment is not allowed. There are no repairable parts inside. In case of a defect please return the equipment to
Bronkhorst High-Tech.
The symbol on an instrument indicates that the user should refer to the operating instructions located in the manual.
Surfaces near the symbol may be hot.
To maintain protection from electric shock and fire, replacement components must be obtained from Bronkhorst High-Tech B.V..
Standard fuses, with applicable national safety approvals, may be used if the rating and type are the same. Other components that
are not safety related may be obtained from other suppliers as long as they are equivalent to the original component. (Note that
selected parts should be obtained only through Bronkhorst® to maintain accuracy and functionality of the product.) If you are
unsure about the applicability of a replacement component, call a Bronkhorst® office for information.
Bronkhorst High-Tech B.V.
E-8000 3 9.17.076