Bronkhorst E-8000 - Manual (Page 9)

Bronkhorst High-Tech B.V.
E-8000 9 9.17.076
2.4.4 Housing dimensions
14TE Cassette table top housing ½ 19" housing
14TE Cassette table rack mount housing 19" housing
2.5 Power supply
Each E-8000 series housing incorporates one or two power supplies. System setup is such that the instruments that belong to the
system can be powered. For other applications or modifications your supplier should be consulted. The power input incorporates
an on/off switch and a fuse.
i
www
Bronkhorst High-Tech B.V. recommends using their standard cables. These cables have the right connectors and if
loose ends are used, these will be marked to prevent wrong connection. The hook-up diagrams are available at the
download section of our website: http://www.bronkhorst.com
The instruments contain electronic components that are susceptible to damage by electro static discharge. Proper
handling procedures must be taken during installation, removing and connecting the electronics.
Please note that E-8000 instruments are rated IP20, implying that the electronics housings and electrical
connections do not offer any protection against moist environments.