Deutsche Telekom Octophon F400 - Manual (Page 2)

2
Before You Begin
These operating instructions describe the Octophon 22/26 of the T-Octopus F 200/400/600 system,
T-Octopus F Server.
They describe all functions you can use from your telephone. You may find that some functions you wish to use
are not available on your telephone. This may be due to one of the following reasons:
•
The function has not been configured for your telephone - address any questions to Customer Support.
• Your communication system does not support this function - contact your sales representative to upgrade
your system.
How to Use these Operating Instructions
Screen Displays
Step by Step
You will find a graphic representation of the steps in logical sequence You will find a graphic representation of the steps in logical sequence You will find a graphic representation of the steps in logical sequence You will find a graphic representation of the steps in logical sequence
in the left column. Below is an explanation of the symbols:
in the left column. Below is an explanation of the symbols: in the left column. Below is an explanation of the symbols: in the left column. Below is an explanation of the symbols:
Lift the handset (off-hook).
Replace the handset (on-hook).
Conduct a call.
Enter a telephone number or code.
Enter the code.
or or or or Press volume controls on the telephone.
Press the key.
Press the illuminated key.
Press the flashing key.
The option appears on the screen.
Press the
key to confirm your selection.
Search for an option.
Press the
keys,
until the option appears on the screen.
Then press the
key to confirm your selection.
Program/Service
Speaker
Start conference?
OK OK OK OK
Display contrast?
OK OK OK OK
Line 1 displays prompts or acknowledgment messages, depending
on the situation.
Line 2 displays functions that you can confirm by pressing .
If the symbol ">" appears on the right, you can press to
access further options.
Please dial
Return to held call?
>
OK OK OK OK