Caple C761GSS - Manual (Page 11)

11
Troubleshooting
If you acquire a problem with your hob, check the following points before calling an
engineer.
1. The power is switched on.
2. The controls are switched on.
3. Both the fuse and the mains fuse are intact.
4. The gas supply is connected to the appliance.
If you are in any doubt about carrying out these checks, call the CAPLE Helpline on
0870 241 1142.
Enamelled parts
All the enamelled parts must only be cleaned with a sponge and soap or other non-
abrasive products. Preferably clean with a cloth.
Stainless steel
Clean with a suitable product. Always dry carefully.
Black burners (“oxi-black” coating)
They can be removed and washed only with soapy water.
Detergents can be used but must not be abrasive or corrosive.
Do not use abrasive sponges or pads.
Do not put in dishwasher.
After each cleaning, make sure that the burner-caps, as well as the burners, have been
well wiped off and CORRECTLY POSITIONED.
It is essential to check the correct position of the burner-caps as the least displacement
from the housing may cause serious problems.
For appliances with electric lighting, check that the electrode is always clean, to allow
regular production of sparks.