Caple C761GSS - Manual (Page 6)

6
1. The hob requires a space in the kitchen work surface as shown in fig 3.
2. Apply the adhesive seal around the edge of the hob, making sure that the ends do
not overlap or leave a space (fig. 4).
3. Attach the hob to the worktop using the brackets supplied as indicated in figure 5.
4. Tighten carefully.
5. Using a sharp tool, trim any excess gasket which protrudes from the edge of the
hob.
6. Assemble the three piece burners. Take care to properly locate the assembled
burner on the burner base (fig. 6).
NOTE: A partition between the base of the hob and the cupboard below should be
fitted 100 mm below the worktop if the cupboard is to be used for storage.
Never place perishable foods in the cupboard below the hob.
Fig. 3
Installation