Caple C930i - Manual (Page 12)

12
PROBLEMS AND SOLUTIONS
What to do if …
Problem Possible cause Remedy
The cooking zone cannot be
switched on or is not operating
More than 10 seconds have
passed since the appliance was
switched on
Switch the appliance on again.
The child safety device is
switched on
Deactivate child safety device
(See the section “Child safety
device”)
Several sensor fields were
touched at the same time
Only touch one sensor field
Automatic switch off has been
triggered
Remove any objects (pan,
cloths, etc.) that are lying on
the control panel. Switch
appliance on again
The residual heat indicator is
not displaying anything
The cooking zone was only on
for a short time and is therefore
not hot
If the cooking zone is supposed
to be hot, call the Customer
Service Department.
lights up
Unsuitable cookware Use suitable cookware
No cookware on the cooking
zone
Put cookware on zone
It is very hard to adjust the
heat settings
Potential differences Do not touch the pan handle
when setting the heat settings
and do not position over the
control panel.
If you are unable to remedy the problem by following the above suggestions, please contact your local
Service Centre.
Warning! Repairs to the appliance are only to be carried out by qualified service engineers.
Considerable danger to the user may result from improper repairs. 3 If the appliance has been
operated incorrectly, the engineer's visit will be chargeable, even during the warranty period.