PSC Falcon 5500 - Manual (Page 12)

Configuration Settings
8
Falcon
®
5500 RFID Mobile Hybrid Computer
Configuration Settings
See Configuration Examples on page 12 for samples of optimized settings for
different usages. Refer to the Falcon 4400 Series PRG for information about
setting other configuration items.
Audio
1. Go to Start > Settings > Control
Panel . Double-tap the Decoding
icon.
2. Select Configure > General > Audio .
3. Choose from the following
options:
• Volume: Move the slider to raise or
lower the audio volume.
• Beep Type
— Good Read selects the tone
(pitch), duration and number of
beeps which are played at the end of a successful RFID painting oper-
ation.
— RFID Tag Read selects the pitch and duration of the beep which is
played each time one or more tags are read. It can also be disabled, so
that only the green LED turns on when new tags are read.
Other options for Beep Type are RFID Tag Write or RFID Failed Write .