Painting – PSC Falcon 5500 User Manual
Page 8
Getting Started
4
Falcon
®
5500 RFID Mobile Hybrid Computer
5. The RFID tag data is entered into the application.
6. When the read is finished, the front LED turns off and a final beep is
heard, indicating that the operation is complete.
The RFID Antenna (in the RFID unit) should be positioned to face the
tag location.
Figure 1. Aiming the Falcon 5500
Configuration Settings on page 8
for information about modifying the
default settings. For more details about RFID tags, see
.
Painting
The paint operation gives the operator the ability to cover an area with RF
energy to gather more than one tag with a single trigger pull. Painting is
achieved by holding down the trigger and sweeping the area containing tags.
The energy is terminated either when the trigger is released or a timeout (as
specified in the control panel settings) occurs. The device will beep each time
additional tags are read while painting. Reference
for
information on setting up your unit for painting.