Rfid electrical considerations, Operating time, Charge time – PSC Falcon 5500 User Manual
Page 9: Operating time charge time
RFID Electrical Considerations
Addendum
5
RFID Electrical Considerations
Operating time
Under normal operating conditions, the RFID battery will last longer than the
Falcon battery. Extended continuous operation may result in the RFID battery
discharging before the Falcon battery. When using “paint” mode, the battery
will last approximately 3 hours.
If the RFID unit fails to operate or produces error messages on the Falcon
screen, it could be an indication that the RFID battery is becoming depleted.
The red indicator light will begin to flash when the battery gets low. See
for more information.
Charge time
After the initial charge, normal charge time is approximately 4 hours. The
time depends on how much charge is in the battery when charging begins.
CAUTION
You must charge the Falcon in the RFID-compatible dock prior to first use. The
initial charge time is approximately 24 hours. See “Charging the Batteries” in the
Falcon 4400 Series Quick Reference Guide (QRG) for more information.