PSC Falcon 5500 - Manual (Page 20)

Configuration Parameters
16
Falcon
®
5500 RFID Mobile Hybrid Computer
Configuration Parameters
The following table lists the configuration parameters which have been added
to support RFID. For instructions on how to set these parameters, as well as
information on all other configuration parameters, consult the Falcon 4400
Series Product Reference Guide (PRG).
Code Parameter/ Description I.D. # Type Acceptable Input
Defaults
Min Max
Fac-
tory
Other Controls Enter 1 for On and 0 for Off.
Label
Separa-
tor
Indicates the label sepa-
rator.
0028 Value
Any single
ASCII
character (00 =
None)
CR CR CR
RFID Enter 1 for On and 0 for Off.
Class 0
Enable Enables Class 0 tags to
be read.
0D00
On/
Off
On or Off Off On On
Class 1
Enable Enables Class 1 tags to
be read.
0D01
On/
Off
On or Off Off On On
Class 1
Gen 2
Enable
Enables Class 1 Genera-
tion 2 tags to be read
0D02
On/
Off
On or Off Off On On
Tag Read
Beep
Enable
Enables the tag read
beep.
0D08
On/
Off
On or Off On On On
Read
Power
Mode
Selects the power mode
to use for RFID reads.
0D09
On/
Off
On = Growing
Off = Constant
Off Off Off
Allow
Dupli-
cates
Allows all tag data to be
reported
0D0A
On/
Off
On or Off Off On Off
(10 seconds)