ChamSys SnakeSys - Manual (Page 10)

SnakeSys User Manual 4 / 44
2.1 Product Diagram
For simple Art-Net or ACN to DMX output conversion on the SnakeSys B4 the DIP switches/rotatory encoders can be used to
quickly configure the device for this mode.
2.2 Art-Net Output
On the DMX output end of the B4, the DIP switches are used to configure the device mode. For Art-Net to DMX output mode
DIP Switch 4 (switch nearest Socket 1) should be up and all other DIP switches should be in the down position.
The rotary encoders on the reverse side of the unit are used to configure the Art-net Subnet and Universe. In this mode universes
following sequentially, so for example when set to 0-0 the 4 DMX output ports would map to Subnet 0, Universes 0, 1, 2, 3
respectively. The LEDs next to the DMX output sockets will light in Blue when the DMX port is active and the unit is outputing
DMX.