ChamSys SnakeSys - Manual (Page 28)

SnakeSys User Manual 22 / 44
Menu Item Function
Netmask Used to set the T2 network sub-net mask which is applied
to all network data that the T2 processor receives. This is
an advanced option, The default subnet mask is normally
255.0.0.0
Default Used to restore default networking settings to the T2.
Everything which can be adjusted in the Network menu or
any of its sub-menus is restored to factory default settings.
4.4.3 Network Port Menu
Menu Item Function
Port A, Port B, Port C Used to enable or disable network packet forwarding for
the respective network port on the front of the T2 unit.
(Port A is the top-most port on the T2). The default setting
is enabled.