ChamSys SnakeSys - Manual (Page 15)

SnakeSys User Manual 9 / 44
Chapter 3
SnakeSys R4
The SnakeSys R4 is a multi-purpose network distribution node, comprising DMX output ports, DMX input ports and multiple
network ports in a 1U rack.
The SnakeSys R4 is designed to be used on stage for Ethernet to DMX conversion, at front of house for DMX to Ethernet
conversaion, and in any other location that requires conversion between DMX and Ethernet or Ethernet switching.
Using one SnakeSys R4 at front of house and one SnakeSys R4 at stage interconnected by a single CAT 5 network cable, the
system provides four DMX lines and three independant network lines all over one cable.
The SnakeSys R4 is a 1U rack featuring:
• Powercon input
• Battery backup
• Three Ethercon network connections on front (all can supply Power over Ethernet)
• Two Ethercon network connections on rear
• Four 5-pin DMX output sockets on the front
• Four 5-pin DMX input sockets on the rear
• Full break detect on all four DMX inputs
• Two remote contact inputs
• Relays to automatically connect inputs to outputs in the event of a power failure