Cloud Electronics CX133 - Manual (Page 9)

8 CX133: I NSTALLATION AND OPERATION MANUAL
15.4 Unbalanced Mode
If the zone outputs are required to operate in the unbalanced mode, the unused pin of the
XLR type connector should be left with no connection.
16 Technical Specifications
Stereo Line Input
Frequency response 20Hz-20kHz ±0.5dB
Distortion <0.03% 20Hz-20kHz
Sensitivity -12dBu(200mV) to +8dBu(2.0V)
Input impedance 47k Ω
Input gain ±10dB
Headroom >20dB
Noise
-90dB (0dB gain) rms 22Hz – 22kHz
HF
±10dB 10kHz Equalisation
LF ±10dB 50Hz
Microphone
Inputs
Frequency response 100hz -3dB(filter) 20kHz ±0.5dB
Distortion <0.02% 20Hz/20kHz
Gain range 0dB-60dB
Input impedance >2k Ω (balanced)
Common mode rejection >70dB 1kHz
Headroom >20dB
Noise
-128dB EIN 22Hz-22kHz (150 Ω)
HF ±10dB 5kHz Equalisation
LF ±10dB 100Hz
Zone outputs & Utility output
Nominal output level 0dBu balanced
Minimum load impedance 600 Ω
Maximum output level +20dBu
17 General Specifications
Power consumption 12VA
Power requirements 230V ± 10% or 115V ± 10%
T50mA H for 230V input Fuse rating
T100mA H for 115V input
Fuse type 20mm x 5mm 250V
Width 482.60mm
Height 44.00mm
Depth
160mm + connectors
Weight 3.50kg including packing
29/05/02 V9