Compuprint 3046 Programmer Manual - Manual (Page 13)

Decimal 27 72
Function
Cancels double-strike printing selected with the ESC G command
ESC q Select character style
Format
ASCII ESC q n
Hex 1B 71 n
Decimal 27 113 n
Parameter range
0 
n 3
Function
Turns on/off outline and shadow printing, according to the parameters below:
n = 0 Turn off outline/shadow printing
1 Turn on outline printing
2 Turn on shadow printing
3 Turn on outline and shadow printing
SO Select double-width printing (one line)
Format
ASCII SO
Hex 0E
Decimal 14
Function
Doubles the width of all characters, spaces, and character spacing (set with the ESC SP
command) following this command on the same line.
ESC SO Select double-width printing (one line)
Format
ASCII ESC SO
Hex 1B 0E
Decimal 27 14
Function
Doubles the width of all characters, spaces, and character spacing (set with the ESC SP
command) following this command on the same line.
DC4 Cancel double-width printing (one line)
Format
ASCII DC4
Hex 14
Decimal 20
Parameter range
No parameters
Function