Compuprint 3046 Programmer Manual - Manual (Page 22)

Signal Name Pin N° Source Description
AUTOFEEDX
T
14 HOST Active low level signal.
GND 16 - Logical ground level (0V).
CHASSIS
GND
17 - Frame ground.
+ 5 VDC 18 PRINTER Is the DC voltage supplied by a component that limits the driven
capability up to 100 mA.
SIGNAL
GND
19-30 - Signal ground.
INIT 31 HOST Active low level signal. Indicates, that the printer is initializing.
The BUSY signal is forced high.
ERROR 32 PRINTER When low, this signal indicates that the printer is off-line, there is
an off-line request from the operator panel, or the printer is in an
error state .
+5V 35 PRINTER Pulled up to signal.
SELECTIN 36 HOST Active low level signal. Enables the printer.